banner

Do you know the precautions for the use of bearing nachi japan?

57 Published by Sep 20,2019

Even if you use the high-performance bearing nachi japan, if you use it improperly, you can't achieve the expected performance effect. Therefore, you need to be cautious when using it. When using bearing nachi japan, you should pay attention to the following:

1. Use appropriate and accurate installation tools, use special tools as much as possible, and try to avoid using cloth and short fibers.

2.use the installation carefully, do not allow strong stamping, do not allow the hammer to directly hit the bearing nachi japan, does not allow the pressure to pass through the rolling body.nachi ball bearing

3. Keep the bearing nachi japan and its surroundings clean. Even if the smiling dust that is invisible to the naked eye enters the bearing, it will increase the wear, vibration and noise of the bearing.

4.to prevent the corrosion of bearing nachi japan, directly take the bearing nachi japan, wash the sweat on your hands, and apply high-quality mineral oil before handling, especially in the rainy season and summer to pay attention to rust.bearing nachi japan

5. the correct choice of cooperation, must know the actual load conditions, working temperature and other requirements of bearing nachi japan, but in fact it is very difficult. Therefore, most of the cases are based on the use of lint selection.

6.The inner diameter and outer diameter of the rolling bearing are manufactured according to the standard tolerance. The inner ring of the imported bearing and the shaft, the tightness of the outer ring and the seat hole can only be achieved by controlling the tolerance of the journal and the tolerance of the seat hole. The inner ring of the bearing and the shaft are made of a base hole, and the bearing nachi japan outer ring and the seat hole are matched by a shaft.

7.The over-winning between the ferrule and the shaft or casing depends on the size of the load. The heavier load uses a larger over-win, and the lighter load uses a smaller over-win.

If you need any brand bearings or any models of bearings, please contact me!

Contact: Grace
Email: ntn@llhbearing.com
Skype:+8618668903871
MP/Whatsapp: +8618668903871
Wechat:GraceXu1234

The NSK brand self aligning bearing abnormal damage measures

Contact fatigue failure means that the working surface of the NSK self aligning bearing is subje...

Do you like ? 372

Read more

Many people do not know the secret of hybrid ceramic balls bearings

Many people do not know the secret of hybrid ceramic balls bearings A. the rolling bearing consis...

Do you like ? 475

Read more

Why Jinan Maolei Bearing sells high-quality, cheap bones bearings

In the early 1980s, skateboarding was at a low ebb, and it was difficult to find high-quality be...

Do you like ? 419

Read more

The Mad History of American DODGE Bearings

Dodge Bearings is the world's largest manufacturer of seated bearings. Founded in 1880, Dodge Bea...

Do you like ? 422

Read more

Different color plastic rubber Nylon coated ball bearing nylon bearings

Nylon bearings material with smart mechanical strength and wear resistance , appropriate for the ...

Do you like ? 441

Read more

How to clean one direction bearing

One direction bearing is one that rotates freely in one direction and is secured within the diffe...

Do you like ? 351

Read more

What are the classification and characteristics of bearings and seals?

What are the classification and characteristics of bearings and seals? Bearing sealing device ge...

Do you like ? 415

Read more

How to maintain the car bearings

The main perform of car bearings is in reality the burden and supply correct steering for the rot...

Do you like ? 419

Read more