What should be paid attention to in the daily maintenance of micro 8mm bearing

Lubrication management: It is very important to choose the right lubricant. Different working environments and operating speeds require different lubricants. For example, high-temperature resistant synthetic lubricants or greases are required in high-temperature environments, while high-speed 8mm bearing may be more suitable for lubricants with good fluidity. Controlling the amount of lubrication is also critical. Excessive lubrication can cause heating and leakage problems. Generally, the amount of grease filling is about 1/3 to 1/2 of the internal space of the bearing, and oil lubrication must ensure that the oil level is within the appropriate range.

‌Cleaning‌: Micro 8mm bearing is very sensitive to impurities. Tiny particles such as dust and metal chips will increase friction and wear, and even cause the bearing to get stuck. Therefore, it is very important to keep the working environment clean and regularly clean the bearings with appropriate tools and cleaning agents, such as a soft brush or clean cotton cloth.

‌Storage conditions‌: Micro 8mm bearings should be stored in a dedicated dust-free room to prevent debris in the environment from touching the bearings. Even tiny dust or hair can cause immeasurable damage to the bearings.

‌Installation and removal‌: Use special tools such as a bearing puller when installing and removing the 8mm bearing. Avoid using tools such as hammers that may damage the bearing. Before installation, make sure the mounting surface is clean and flat, and avoid applying excessive impact force to the bearing.

‌Temperature control‌: Avoid heating the 8mm bearing above its design limit, and check the bearing regularly for overheating. Overheating can cause permanent deformation or softening.

‌Corrosion prevention‌: Avoid exposing the 8mm bearing to humid environments, choose bearings suitable for corrosive environments, and take measures to prevent sweat or other liquids from entering the bearing.

‌Monitor operating status‌: Check the operating status of the bearing regularly, and pay attention to abnormal signs such as noise, vibration, or temperature increase. If any abnormalities are found, they should be closely monitored and handled promptly.

If you need any brand bearings or any models of bearings, please contact me! Contact: Grace Email: ntn@llhbearing.com Skype:+8618668903871 MP/Whatsapp: +8618668903871 Wechat:GraceXu1234