Ball bearing 6205 2rs is the most representative rolling bearings

Ball bearing 6205 2rs is the most representative rolling bearings with a wide range of uses. They are suitable for high speed or even extremely high speed operation, and are very durable and do not require frequent maintenance. Ball bearing 6205 2rs has a small friction coefficient, high limit speed, simple structure, low manufacturing cost, and is easy to achieve high manufacturing precision. The size range and form vary widely, and are used in precision instruments, low-noise motors, automobiles, motorcycles, and general machinery. They are the most widely used type of bearings in the machinery industry. Ball bearing 6205 2rs mainly bear radial loads and can also bear a certain amount of axial loads.

When a larger radial clearance is selected, the axial load capacity increases, and the contact angle is zero when ball bearing 6205 2rs pure radial force. When there is an axial force, the contact angle is greater than zero. Generally, a stamped wave-shaped cage, a machined solid cage, and sometimes a nylon cage are used.
After the ball bearing 6205 2rs is installed on the shaft, within the axial clearance range of the bearing, the axial displacement of the shaft or housing in both directions can be limited, so axial positioning can be performed in both directions.

In addition, this type of bearing also has a certain self-aligning ability. When it is tilted 2′~10′ relative to the housing hole, it can still work normally, but it has a certain impact on the bearing life. Ball bearing 6205 2rs cages are mostly steel plate stamping wave-shaped cages, and large bearings mostly use machined metal solid cages.
If you need ball bearing 6205 2rs or need any other bearings, please feel free to contact nsk@zyslbearing.com or call me to get more information!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271