Bearing 2 inch bore size type introduction

A variety of bearing 2 inch bore size are available. Including pillow block bearings, ball bearings, and roller bearings.

• Pillow Block Mounted Ball Bearing 2 inch Bore Size: These are complete units often with a cast iron housing and a self-aligning feature, suitable for general industrial use. The UCP210-32 series is a common example, with specifications including a 2-inch inner diameter
• 
• Deep Groove Ball Bearing 2 Inch Bore Size: Available as the unmounted bearing itself, such as the 61910-2RS Ball Bearing (2-inch bore, 2-3/4 inch diameter). This type can handle both radial and moderate axial loads. The "2RS" indicates it has two contact seals, making it suitable for dirty or humid environments.
• Tapered Roller Bearing 2 inch Bore Size: These are designed to manage both heavy radial and axial loads. An example is the uxcell 3780/3720 Tapered Roller Bearing Cone and Cup Set with a 2-inch bore and 3.6718-inch outer diameter.
• Spherical Plain Bearing 2 Inch Bore Size: The GEZ 200 ES-2RS (or generic GEZ200ES-2RS) is a double-sealed spherical plain bearing with dimensions of 2" bore x 3-3/16" OD x 1-3/4" width, used in applications requiring alignment accommodation.
• Insert Bearing 2 Inch Bore Size: These are typically part of a mounted assembly and come in various types like those with an eccentric locking collar for secure shaft attachment, such as the MAPLE ACE HC211-32.
• 
• Needle Roller Bearing 2-Inch Bore Size: The uxcell B3216 is a drawn cup, open-end, full complement needle roller bearing with a 2-inch bore and 2-3/8-inch outer diameter.

When somebody said bearing 2 inch. Usually we think the bearing they mentioned is inset ball bearing. Such as UC210-32,UC310-32.With the housing. it will be a whole set pillow block bearing.