Features of Small Needle Roller Bearing HK0810

Needle roller bearing HK0810 is a metric drawn cup needle roller bearing, known for its high load capacity in a compact, low-profile design, featuring an 8mm inner diameter, 12mm outer diameter, and 10mm width (8x12x10mm). It's used in applications requiring high radial load support where space is limited, such as in automotive transmissions, pumps, and precision instruments, often requiring a hardened shaft or housing bore as the inner raceway. Drawn cup needle roller bearings are typically used in applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly.But where a very compact and economical bearing arrangement is required. Owing to their large number of rollers, the bearings have a high load carrying capacity and stiffness.This caged drawn cup needle roller bearing has a steel cage and is suitable for applications with high dynamic loads. It has a smaller cross-section than a machined needle roller bearing for use in restricted mounting spaces. The steel cage provides guidance and even spacing of the rollers for reduced friction, vibration, and noise when operated at high speeds. The needle rollers are made of through-hardened.High-carbon chromium steel for durability and heat tolerance.And have contoured ends to optimize the distribution of contact stress. This Needle Roller Bearing is used in various applications.Such as automotive and truck transmissions.Agricultural and construction equipment.Pumps and compressors.And two-cycle engines, among others.

• Type: Drawn Cup Needle Roller Bearing.
• Dimensions: 8mm (ID) x 12mm (OD) x 10mm (Width).
• Design: Features a thin, drawn steel outer shell (cup) and numerous small needle rollers for high load capacity.
• Load Capacity: High radial load carrying capacity and stiffness due to many rollers.
• Space Efficiency: Very low cross-sectional height, ideal for compact spaces. 

• Automotive & Truck Transmissions
• Agricultural & Construction Equipment
• Pumps & Compressors
• Precision Instruments & Micro Motors
• Variations of Bearing HK0810:

• Open Ends (HK): The standard type, where the housing bore acts as the inner raceway.
• Sealed (e.g., HK0810-2RS): Includes seals on both sides for protection.

If you need any brand bearings or any models of bearings, please contact me! Contact: April Email: nsk@llhbearing.com Skype/Wechat:April15315593063 MP/Whatsapp: +8615315593063