Bearing t206 is high quality pillow block bearing

Clearance control of bearing t206
In order to solve the problem of radial clearance exceeding tolerance after assembly by controlling the axial clearance commonly used in bearing t206 production, the radial clearance range when calculating the axial clearance is compressed by strictly controlling the accuracy of the inner and outer grooves and steel balls, and the lower limit remains unchanged, and the upper limit is compressed by 15%. The axial clearance obtained by this method is used as a reference to control the actual radial clearance after assembly.
Advantages of bearing t206

(1) Under normal working conditions, the friction coefficient of rolling bearings is small and will not change with the change of friction coefficient, which is relatively stable; the starting and running torque is small, the power loss is small, and the efficiency is high.
(2) The radial clearance of bearing t206 is small, and it can be eliminated by axial preload, so the running accuracy is high.
(3) The axial width of bearing t206 is small, and some bearings bear radial and axial composite loads at the same time, with compact structure and simple combination.
(4) Rolling bearings are standardized components with a high degree of standardization and can be mass-produced, so the cost is low.
Disadvantages of bearing t206
(1) The contact area between the rolling element and the pipe of the rolling bearing is small, especially the ball bearing, which has poor impact resistance.

(2) Due to the structural characteristics of the rolling bearing, the radial clearance is relatively large, resulting in large vibration and noise.
(3) The service life of the rolling bearing is reduced under high speed and heavy load conditions.
(4) The inner and outer rings of the rolling bearing adopt an integral structure.
If you need bearing t206 or need any other bearings, please feel free to contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +861509891627