22320 e is a self-aligning roller bearing

The 22320 e bearing is a self-aligning roller bearing, the size of the 22320 e bearing is as below:
Model No. : 22320 e bearing
Inside diameter: 100 mm
Outer diameter: 215 mm
Thickness: 73 mm
22320 e Bearing applications:

Spherical roller bearing 22320 e is mainly used to bear radial load, at the same time can also carry small axial load, radial load capacity under a high performance good, allow inner circle circle of foreign relative tilt is not greater than 4 2 hole under the working conditions of cone bearing inner ring moving along the axial radial clearance can be adjusted in a tight sleeve bearing is suitable for in no shoulder on the optical axis of applicable often need to install remove bearing outer ring have oil groove and three lubrication holes, then buy code increase "56 -" a lubrication bearing lubrication cooling slots.

22320 e bearing construction makes it self-aligning, so it is not easy to be affected by the Angle of the shaft and bearing box on the error or bending of the shaft, and it is suitable for the occasion of the error caused by the installation error or deflection of the shaft.The bearing can bear radial load as well as bidirectional axial load.
The curvature center of the raceway surface of the outer ring of 22320 e is consistent with the bearing center, so it has the same tuning function as the automatic aligning ball bearing.In the shaft, shell deflection, can be automatically adjusted, do not increase the burden of the import bearing.Self-aligning roller bearing can bear radial load and axial load in two directions.
The cage USES a steel plate press cage and a brass turning cage.
If you need 22320 e bearing or need any other bearings, please also contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271