61806 2rs bearing is hybrid ceramic bearing

Clearance control of high speed 61806 2rs ball bearing
In order to solve the problem of radial clearance exceeding tolerance after assembly by controlling the axial clearance commonly used in guide production, the radial clearance range when calculating the axial clearance is compressed by strictly controlling the accuracy of the inner and outer grooves and steel rollers, and the lower limit remains unchanged, and the upper limit is compressed by 15%. The axial clearance obtained by this method is used as a reference to control the actual radial clearance after assembly.
Advantages of 61806 2rs ball bearing

(1) Under normal working conditions, the friction coefficient of 6806 2rs ball bearing is small and will not change with the change of friction coefficient, which is relatively stable; the starting and running torque is small, the power loss is small, and the efficiency is high.

(2) The radial clearance of 61806 2rs ball bearing is small, and it can be eliminated by axial preload, so the running accuracy is high.
(3) The axial width of 61806 2rs ball bearing is small, and some bearings bear radial and axial composite loads at the same time, with compact structure and simple combination.
(4) Rolling bearings are standardized components with a high degree of standardization and can be mass-produced, so the cost is low.
Disadvantages of 61806 2rs ball bearing
(1) The contact area between the rolling element and the pipe of the high speed 61806 2rs bearing is small, especially the roller bearing, which has poor impact resistance.
(2) Due to the structural characteristics of the rolling bearing, the radial clearance is relatively large, resulting in large vibration and noise.
(3) The service life of the 61806 2rs ball bearing is reduced under high speed and heavy load conditions.
(4) The inner and outer rings of the rolling bearing adopt an integral structure.
If you need 61806 2rs bearing or need any other bearings, please feel free to contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271