Ball bearing singapore bearing introductions

Ball bearing singapore is a kind of rolling bearing, the ball ball is installed in the middle of the inner ring and the outer ring, which can bear a large load.Also called ball bearings.

Structure for ball bearing singapore:
Ball bearing singapore are mainly composed of four basic components: ball, inner ring, outer ring and cage or retainer.General industrial use of ball bearing meet the standard of AISI 52100, ball and ring usually are made from high chromium steel, Rockwell hardness (Rockwell C - scale hardness) about between 61-65.The hardness of the retainer is lower than that of the ball bearings and rings, and its materials are metal (e.g., medium carbon steel, aluminum alloy) or non-metal (e.g., teflon, PTEF, polymer materials).Ball bearing singapore has lower rotational friction resistance than journal bearing, so at the same rotating speed, the temperature of friction will be lower.

Ball bearing singapore,bearing load in operation is too small, will make the ball and raceway between sliding, become the cause of abrasion.This tendency is particularly evident in large ball bearing singapore with large ball and cage weights.In many cases, bearing corrosion occurs. There are many reasons for bearing corrosion.

The most common factors in our daily life are as follows:
1) due to poor sealing device, it is invaded by water and dirt;
2) the bearing is not used for a long time, which exceeds the anti-rust period and lacks maintenance.
3) large roughness of metal surface;
4) contact with corrosive chemical media, bearing cleaning is not clean, the surface is stained with dirt, or sweat hand contact with the ball bearing singapore bearing, bearing cleaning, not timely packaging or installation, long-term exposure to the air, by the air moisture invasion and contamination;
If you need ball bearing singapore or any models of bearings, please contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271
Wechat:leon15098916271