Ceramic ball bearings skateboard

How to clean ceramic ball bearings skateboard?
The cleaning of ceramic ball bearings skateboard is very simple. Take the ceramic ball bearings skateboard off the plate, use a paper towel to wipe off the oil and dirt on the bearings, and also wipe off the inner wall of the wheels.
Replacing the wheels before and after is beneficial for the smoothness of the bearings. Clean the bearings approximately once a week. The high temperature generated by the rotation of the bearings during the use of the plate causes the glue and bearing walls of the wheels to stick tightly, making it inconvenient to replace the wheels or bearings.
Therefore, it is necessary to frequently remove the bearings and install the wheels. To avoid trouble, clean the bearings at the same time.

How to add oil for ceramic ball bearings skateboard?
After cleaning, remember to apply oil for ceramic ball bearings skateboard. The range of oil is wide, including edible oil. However, some people say that the purchased bearings should be soaked in gasoline for a week first, which is a waste of gasoline.

If the purchased bearings need to be cleaned after a week, it's okay to apply oil. The newly purchased bearings have lubricating oil, which is used to store oil to prevent bearing rust. When using the plate, the oil can be sent out of the bearings. When cleaning, the oil used for the first time should be removed, When applying oil, these oils do not provide lubrication, just like a measuring cylinder that cannot be heated and only measures liquid. They only prevent rust, but it is difficult for commonly used plate bearings to rust.
If you need ceramic ball bearings skateboard or need any other bearings, please feel free to contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271