Home > News > Company news > Important Note When install ceramic kart axle bearings

Important Note When install ceramic kart axle bearings

119 Published by admin Sep 18,2023

Ceramic kart axle bearings are high-performance bearings due to their high temperature resistance, corrosion resistance, and high hardness.It is widely used in various industrial equipment due to its unique characteristics. However, due to the unique characteristics of ceramic bearings.
Special attention should be paid to the installation process. This article will introduce the precautions for installing ceramic bearings.Matters to help readers correctly install ceramic bearings and improve the service life and performance of the equipment.

1、 Choose the appropriate installation and tools
Before installing ceramic kart axle bearings, it is important to first ensure the selection of suitable installation tools. Next, it is recommended to use specialized installation tools, such as installation sleeves, installation hammers, etc.These tools having a shape and size suitable for the installation of ceramic kart axle bearings can reduce damage to the bearings during the installation process.
2、 Keep clean
Before installing ceramic kart axle bearings, the working environment should be kept clean. Clean the workbench, tools, and hands to prevent impurities such as dust and oil from entering the interior of the bearings. At the same time, the surface of the bearing seat and bearing hole should also be checked for flatness. If there are dents or wear, they should be repaired in a timely manner to ensure that
Verify the quality of installation.

ceramic kart axle bearings zro2

3、 Correct installation of bearings
When installing ceramic kart axle bearings, the following points should be noted:
a. The bearing should be pushed into the bearing seat from one side of the shaft, and should not be installed diagonally or knocked with tools such as a hammer to avoid damaging the bearing surface.
When pushing in the bearing seat, it is necessary to maintain the coaxiality between the bearing and the seat hole to avoid bearing damage or installation difficulties caused by deviation.
b. When installing the bearing, it should be gently pushed in by hand and not applied too much force to avoid deformation or damage to the bearing.
c. After the bearing is installed in place, rotate the bearing with your fingers to check for flexibility and smoothness. Any abnormalities should be promptly eliminated.

4、 Proper lubrication
Before installing ceramic kart axle bearings, appropriate lubricants should be selected based on actual working conditions. The amount of lubricant used should be moderate, as excessive lubricant can increase friction and affect the normal operation of bearings.

5、 Check installation quality
Firstly, the connection between the bearing and the bearing seat should be checked for firmness, looseness, and deformation. Secondly, it is necessary to check whether the rotation of the bearing is smooth and free from abnormal sounds and resistance. Finally, the axial clearance of the bearing should be checked for compliance with the requirements and adjusted if necessary.

ceramic kart axle bearings si3n4