We provide different sizes of cycle handle ball bearing for bike

Cycle handle Ball bearing are mainly composed of four basic components: ball, inner ring, outer ring, and retainer, also known as cage or retainer. General industrial ball bearings meet the AISI 52100 standard, and the balls and rings are usually made of high chromium steel with a Rockwell C scale hardness of approximately 61-65. The hardness of the retainer is lower than that of the ball and ring, and its materials include metals (such as medium carbon steel, aluminum alloy) or non-metals (such as Teflon, PTEF, polymer materials). Ball bearings have lower rotational friction resistance than journal bearings, so the temperature generated by friction will be lower at the same speed.

  It mainly bears radial loads and can also withstand both radial and axial loads simultaneously. When it only bears radial loads, the contact angle is zero. When cycle handle ball bearing has a large radial clearance, they have the performance of angular contact bearings and can withstand large axial loads. The friction coefficient of deep groove ball bearings is very small, and the maximum speed is also high.
Bearing characteristics
  The most commonly used rolling bearings. Its structure is simple and convenient to use. Mainly used to withstand radial loads, but when the radial clearance of the bearing is increased, it has certain performance of angular contact ball bearings and can withstand combined radial and axial loads. When the rotational speed is high and thrust ball bearings are not suitable, they can also be used to withstand pure axial loads. Compared with other types of bearings with the same specifications and dimensions as deep groove ball bearings, this type of bearing has a lower friction coefficient and a higher limit speed. But it is not resistant to impact and is not suitable for bearing heavy loads.

  After installing thecycle handle ball bearing on the shaft, within the axial clearance range of the bearing, it can limit the axial displacement in both directions of the shaft or shell, and therefore can perform axial positioning in both directions. In addition, this type of bearing also has a certain degree of centering ability. When tilted 2 ′ to 10 ′ relative to the outer shell hole, it can still work normally, but it has a certain impact on the bearing life.

If you need any brand bearings or any models of bearings, please contact me!
Contact: April
Email: nsk@llhbearing.com
Skype/Wechat:April15315593063
MP/Whatsapp: +8615315593063