Double lip shaft seal is generally the role of the transmission components

Double lip shaft seal is generally the role of the transmission components in the need of lubrication parts and output parts isolated, not to let the oil leakage, usually used for rotary shaft, is a rotary shaft lip seal.
Many enterprises in the skeleton double lip shaft seal wear problems found equipment can choose after repair welding, brush plating, such as traditional repair technology to repair, but we do not recommend using repair welding or brush plating, first repair welding double lip shaft seal can cause caused by thermal stress concentration to the shaft, the shaft surface tiny crack adverse factors, such as bending deformation in the shaft itself, lost the original toughness strength, will also use of shaft in the late great potential safety hazard in the process, a lot of important equipment after repair welding of shaft are bend or break.
The double lip shaft seal specific operation steps are as follows
1. Measure the wear size of conveyor frame double lip shaft seal;
2. Surface baking oil treatment: the surface baking oil treatment was conducted on the repair site with oxyacetylene until no sparks were spilled;
3. Surface polishing: use an Angle grinder to polish the surface of the repair part to expose the metal primary color. The rougher the surface, the better.
4. Surface cleaning treatment for double lip shaft seal: clean and polish the parts to be repaired with anhydrous ethanol to ensure the surface is clean and dry;
5. Calculate the amount of material according to the measured wear size, blend the soray carbon nanometer polymer material in proportion to uniform and without color difference, apply the blended material to the site to be repaired, use a scraper to scrape the material evenly and grind it repeatedly until the surface is free of holes and defects;
6. The repair can be completed by curing the material and then removing the excess material from the surface.
If you need double lip shaft seal or need any other bearings, please also contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271