Do you know what is Forklift Mast Bearing?

Forklift mast bearing is a very important hardware component used in forklifts. Forklift mast bearing play an irreplaceable role in the work of forklifts.
Forklift mast bearing is different from normal bearings.They are better in terms of workmanship, materials and performance. It is an indispensable equipment for pallet transportation and container transportation.

Forklift mast bearing lubrication

first open the cover, observe the wear of the release bearing.If it is confirmed that the bearing is not damaged or the wear does not exceed the limit.Then remove the clutch pedal, adjust the ejector rod.And return the release bearing and its seat to the final position. Use a pointed grease gun to add grease to the hole seat until oil overflows from the bearing.

Then turn the bearing a little, add oil again, and repeat the above work until a little butter overflows around the bearing.Next rotate the bearing and observe the amount of oil , If you feel resistance to the rotation of the bearing, it proves that the bearing has been filled with butter.

Then remove a small amount of butter overflowing from the release bearing seat, and readjust the release bearing position.

Precautions
1. Keep the forklift mast bearing and their surrounding environment clean.
Even smiling dust that is invisible to the naked eye enters the forklift mast bearing, which increases the wear, vibration and noise.
2. Be careful when using and installing.
Strong stamping is not allowed, the forklift bearing is not allowed to be hit directly with a hammer, and the pressure is not allowed to be transmitted through the rolling elements.
3. Use appropriate and accurate installation tools.
Use special tools whenever possible, and try to avoid things like cloth and short fibers.
4. Prevent forklift mast bearing from rusting.
When handling forklift bearings directly by hand, fully wash off the sweat on your hands, and apply high-quality mineral oil before operating. Especially in the rainy season and summer, pay special attention to rust prevention.

However, under certain special operating conditions, forklift mast bearing can achieve a longer life than traditional calculations, especially under light loads. These special operating conditions are when the rolling surfaces (tracks and rolling elements) are effectively separated by a lubricating oil film and limit possible surface damage caused by contamination.

If you need any brand bearings or any models of bearings, please contact me!

Contact: Leon
Email: nsk@zyslbearing.com
Skype:+8615098916271
MP/Whatsapp: +8615098916271
Wechat:leon15098916271