Thrust washers is aring component with thrust rolling bearings

Thrust washers is aring component with thrust rolling bearings with one or more raceway.
Thrust washers category:
1. Bearing Part Bearing Part
Any of the components of a rolling bearing, but not all accessories.
2. The bearing ring bearing ring thrust washers
A circular part of a centripetal rolling bearing having one or more raceways.
3. Bearing thrust washers bearing
A ring part of a thrust rolling bearing having one or more raceways.
4. Flat ring loose rib

A detachable, essentially flat gasket with an inner or outer part that ACTS as a wing on the outer or inner ring of a centriped-cylindrical roller bearing.
5. Detachable thrust washers
A detachable ring having an "L" shaped section with the outer part acting as a side guard for the inner ring of a centripetal cylindrical roller bearing.
6. Middle ring guide ring thrust washers
A detachable ring in a roller bearing having two or more rows of rollers for isolating and guiding the rollers.For example, the middle integral edge of the cone inner ring of double raceway.
7. Locating Snap Ring thrust washers

A single ring with a constant cross section, mounted in a circular groove, locating the rolling bearing axially in the housing or on the shaft.
8. The Retaining ring is a retaining ring thrust washers
A single ring with a constant cross section, mounted in a circular groove as a retainer to hold the roller or cage in the bearing.
9. Every ring spacer thrust washers
Is a ring part used between two bearing rings or bearing washers or between two half bearing rings or between two half bearing washers to maintain the specified axial distance between them.
Seal ring seal
If you need thrust washers or need any other bearings, please also contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271