Insert ball bearing uc 209 details

UC series insert bearing uc 209 is actually the deep groove ball bearing a form, characteristic is its outer diameter for spherical surface, can match the bearing of the corresponding concave spherical self-aligning effect within the outer spherical bearing is suitable for the required equipment and parts of simple situation, such as used for agricultural machinery, transportation systems or on construction machinery.

UC series insert bearing uc 209 is mainly used to bear radial direction load primarily radial and axial loads, and should not be commonly alone bear axial load, the bearing can be installed separately inner ring (with full set of roller and retainer) and outer ring. This kind of bearings are not allowed to have inclined shaft relative shell, under radial load appointment will generate additional axial force.

bearing uc 209 details:

	d	45 mm	Bore diameter
	DSP	85 mm	Outside diameter
	B	49.2 mm	Width
	C	22 mm	Width, outer ring
	C2	22.6 mm	Sealing total width
	S	19 mm	Distance raceway
	d1	57.91 mm	Rib diameter inner ring
	Ca	6.3 mm	Distance to lubrication hole
	A	8 mm	Distance thread
	W	4 mm	Width of flats

bearing uc 209 picture:

Not only can we produce bearing uc 209 made of bearing steel, we can also produce stainless steel, all ceramic materials, and mixed ceramic materials. We also provide original imported brand bearing uc 209

If you need any brand bearings or any models of bearings, please contact me!

Contact: Grace
Email: ntn@llhbearing.com
Skype:+8618668903871
MP/Whatsapp: +8618668903871
Wechat:GraceXu1234