NU cylindrical roller bearing is high quality bearing

NU cylindrical roller bearing cylindrical roller and raceway are linear contact bearings. Large load capacity, mainly bear radial load. The friction between the rolling body and the rim of the ring is small, suitable for high-speed rotation.
Characteristic of nu cylindrical roller bearing:
NU cylindrical roller bearing can move axially, can adapt to the change of the relative position of the shaft and the shell caused by thermal expansion or installation error, can be used as free end support.
NU cylindrical roller bearing application:
Large and medium-sized motor, rolling stock, machine tool spindle, internal combustion engine, generator, gas turbine, reducer, rolling machine, vibrating screen and lifting machinery.
NU cylindrical roller bearing are as follows:
1. The backlash of nu cylindrical roller bearing and oval bearing bushing can be adjusted by manual scraping or by repairing scraping after turning with pad in the bearing.
2. The top gap of the cylindrical and oval bearing can be adjusted by manual scraping or by adding pad to the surface of the bearing when the situation permits.
3, for the multi-oil wedge fixed bearing, in principle is not allowed to repair scraping and adjust the bearing gap, gap inappropriate should be replaced with new tile.
4. For the multi-oil wedge tilting bearing, scraping tile is not allowed, and the gap should be replaced because of inappropriate tile. For the tile with adjustable thickness, the wattage can be adjusted by adding stainless steel cushion under the adjusting block behind the tile, or thinning the thickness of the adjusting block. Note that for the multi-oil wedge tilting bearing, the thickness error between the same group of tiles should be less than 0.01mm.
If you need nu cylindrical roller bearing or need any other bearings, please feel free to contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271