nu1038 belongs to cylindrical roller bearing products

Nu1038 belongs to cylindrical roller bearing products, inner diameter of 190mm, outer diameter of 290mm, thickness of 46mm.
The characteristics of nu1038 cylindrical roller bearing:
1. Roller and raceway for line contact or repair line contact, radial bearing capacity is large, suitable for heavy load and impact load.
2. Small friction coefficient, suitable for high speed, limit speed close to deep groove ball bearings.
3. Type N and NU can be moved axially, can adapt to the change of relative position between shaft and shell caused by thermal expansion or installation error, can be used as free end support.

4. The processing requirements of the shaft or seat hole are high. The relative deviation of the outer ring axis after the installation of the nu1038 bearing should be strictly controlled to avoid the concentration of contact stress.
nu1038 bearings are as follows:
1. The clearance of cylindrical and elliptical bearing bushing can be adjusted by manual scraping or the method of repairing and scraping after pad turning in the bearing.
2. The top clearance of nu1038 cylindrical and elliptical bearing bush can be adjusted by manual scraping or by adding pad to the face of the bearing when the situation permits.

3. In principle, scraping and adjusting the clearance of the nu1038 bearing bush are not allowed for the multi-wedge fixed bearing bush. When the clearance is not suitable, a new tile should be replaced.
The rolling body is a centripetal rolling bearing of a cylindrical roller.The internal structure of nu1038 cylindrical roller bearings adopts rollers arranged in parallel, and a spacer or isolation block is installed between the rollers, which can prevent the tilt of the rollers or the friction between the rollers, and effectively prevent the increase of rotation torque.
If you need nu1038 bearing or need any other bearings, please also contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271