We are roller flange bearing manufactruer!

The taper roller flange bearing is a separate type bearing
The inner and outer rings of the taper roller flange bearing have conical raceways, which have the advantages of compact structure, strong load-bearing capacity, and separable inner and outer rings. They are widely used in automotive transmissions, as well as in industries such as rolling mills, mining, metallurgy, and plastic machinery.

The taper roller flange bearing has conical inner and outer raceways, with tapered rollers arranged between the two. The projection lines of all conical surfaces converge at the same point on the bearing axis. This design makes tapered roller bearings particularly suitable for bearing composite (radial and axial) loads. The axial load capacity of bearings is mostly determined by the contact angle α Determined; α The larger the angle, the higher the axial load capacity. The angle size is represented by the calculation coefficient e; The larger the e-value, the greater the contact angle, and the greater the applicability of the bearing to withstand axial loads.

There are several precautions for using taper roller flange bearing:
(1) Keep the tape roller flange bearing and its surroundings clean.
Even small dust that cannot be seen by the eyes can have a negative impact on the bearings. So, it is important to keep the surroundings clean to prevent dust from entering the bearings.
(2) Carefully use the taper roller flange bearing.
Strong impact on tapered roller bearings during use can cause scratches and indentations, which can become the cause of accidents. In severe cases, cracks and fractures may occur, so attention must be paid.
(3) Use appropriate operating tools.
To avoid using existing tools instead, it is necessary to replace the taper roller flange bearing with appropriate tools.
(4) Pay attention to the corrosion of the taper roller flange bearing.
When operating bearings, sweat on the hands can become the cause of rust. Pay attention to using clean hands for operation, and it is best to wear gloves as much as possible.
It is a common method to use hearing to identify irregular operation. For example, experienced operators use electronic Stethoscope to detect abnormal noise of a part. If the bearing is in good operating condition, it will emit a low whining sound. If it emits a sharp hissing sound, tapered roller bearings, squeaks, and other irregular sounds, it usually indicates that the bearing is in poor operating condition.

We can process and customize various non-standard sizes, including irregular, special, special, elevated, thickened, ultra-thin, carbon steel, bearing steel, micro, extra large, high temperature, low temperature, high speed, low speed, insulation, ceramic non-standard bearings.

If you need any type/brand bearings,please contact me!

contact:Bella
Whatsapp+8615315596312
Wechat:+8615318805907
Skype/Email:skf@llhbearing.com