Ucp 206 bearing is a metric outer spherical bearing with a height of 165mm

Ucp 206 bearing is a metric outer spherical bearing with a height of 165mm.
Ucp 206 bearing installation environment:
1.Ucp 206 bearing installation should be prepared before installation in a dry and clean environment.
2. Prepare the parts, tools and equipment needed for installation.
3. Prepare the parts to be installed and clean thoroughly before installation.
4. Check the size and shape accuracy of all parts to be installed according to the drawing.
5. Do not disassemble the ucp 206 bearing package before the completion of installation preparation to avoid bearing contamination.

Installation method of ucp 206 bearings:
1. ucp 206 bearings are widely used in the pressing method of press.Pad the pad into the inner ring, with the press quietly to the inner ring and close contact with the shaft shoulder.It is absolutely forbidden to install the pad on the outer ring pad on the inner ring, which is the cause of indentation on the racetrack.
2. During operation, it is better to oil the mating surface in advance. If you have to hit the installation occasion with a hammer, use the cushion block on the inner ring to operate.

3, such as ucp 206 bearing and other non-separation bearing, inner ring and outer ring need interference installation occasions, with pad pad, screw or oil pressure, the inner and outer ring at the same time.The outer ring of the self-aligning ball bearing tends to tilt, even if it is not interference fit, it is best to install the pad on the pad.
1.For separable bearings such as cylindrical roller bearings and tapered roller bearings, the inner ring and the outer ring can be installed on the shaft and the housing respectively. When the inner ring and the outer ring are respectively installed.
If you need ucp 206 bearing or need any other bearings, please also contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271