Plummer block bearings is a kind of large and extra-large bearing

Plummer block bearings is a kind of large and extra-large bearing seat that can accept comprehensive load and special structure.Plummer block bearings has the characteristics of compact structure, sensitive rotation and convenient maintenance of the device.  Where there is a bearing, there is a support point, the inner support point of the bearing is the shaft, and the outer support is often said to be the plummer block bearings.  
As the most common problem of plummer block bearings, bearing seat wear phenomenon often occurs. 
How to repair plummer block bearings? 

The traditional method generally adopts machining after surfacing welding to repair, but the surfacing welding will make the surface of parts reach a very high temperature, resulting in deformation or crack of parts, and the machine processing to obtain the size will greatly prolong the downtime.  
The use of polymer composite materials for on-site repair, neither heat influence, repair thickness is not limited, the product has wear resistance and metal materials do not have the concession, to ensure that the repair part of the contact with 100%, reduce the impact of vibration equipment, avoid the possibility of wear.  Site repair, avoid machining method.   

if the plummer block bearing equipped with neutrons, pay attention to the signal lines between absolute ban on die casting machine and the bearing has a joint phenomenon, the reason is very clear, in the daily production, it is hard to avoid signal lines touch water, easily broken or joint bandage, resulting in the sub and machine tool, if error caused by signal, light alarm, automatic stop delay time, the signal is disorder,  Top up the plummer block bearings.  Cause unnecessary losses.  
If you need plummer block bearings or need any other bearings, please feel free to contact me to get more detail!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271