Thin wall ceramic bearings simple fit selection

Thin wall ceramic bearings simple fit selection
What is the simple choice of thin wall ceramic bearings?  What impact will different choices have on bearing collocation?  What are the consequences even for machinery? 
1. Interference fit or transition fit should be selected for the thin wall ceramic bearings ring relative to the load.  Gap fit should be selected for the ferrule which is fixed relative to the load direction.  When the non-detachable bearing is used as the flow support, the ring with fixed direction relative to the load should be used as the moving ring, and the clearance fit or transition fit should be selected.  

2, the type and size of the load when the impact load or heavy load, generally should choose more closely than normal, light load.  The radial bearing load is divided by the ratio of radial equivalent dynamic load PR to radial rated dynamic load CR.
The greater the load, the greater the fit interference.  Load PR/CR Less than or equal to 0.07 Light load greater than 0.07 to 0.15 Normal load greater than 0.15 heavy load  
3.Thin wall ceramic bearings size With the increase of bearing size, the larger the interference fit selected, the larger the clearance fit clearance.
4. The interference fit of thin wall ceramic bearings clearance will lead to the reduction of bearing clearance. It should be checked whether the clearance of thin wall ceramic bearings meets the requirements after installation, so as to correctly select the fit and bearing clearance.  
5, other factors affect the material, strength and thermal conductivity of the shaft and bearing seat;  External and in the thin wall ceramic bearings heat conduction way and heat, support installation and adjustment performance affect the choice of match. 
If you need thin wall ceramic bearings or need any other bearings, please feel free to contact me!
Contact: Leon
Email: nsk@zyslbearing.com
Skype: lh19881023
MP/Whatsapp: +8615098916271